Step-by-step Guide to Installing a New Shower Unit

Call Us Today

 

How do you actually feel on the subject of How to Install a Freestand?


Simple ways to Install a Shower Cubicle on Your Own
A successful shower setup needs mindful planning and a great deal of job. In most cases, you will need to do three kinds of tasks: mounting wall surfaces, mounting the plumbing, and finishing wall surfaces.

 

Prep work


Firstly, you have to choose the sort of shower that you wish to set up. It is essential to determine whether the picked shower can dealing with certain systems as well as can control a safe degree of water with the central heating boiler. Most shower units nowadays are developed to be flexible to various water stress (such as stored hot water as well as chilly keys).
It is additionally crucial to consider the water pressure as well as the planning of the piping and drain for the shower

 

Different Kinds Of Shower Units

 

  • Push-on Mixer: The hose pipe as well as spray parts of the push-on mixer shower system can be connected to the bath faucet based on your demand, as well as the water temperature can be adjusted using the faucets. Push-on mixers are cheap as well as extremely straightforward to mount. Nevertheless, although the hose link is basic, it is easily displaced. Furthermore, it is troublesome to change the temperature level.

  • Bath/Shower Mixer: The hose pipe and also spray of this type of shower are combined with a bathroom mixer tap, as well as the temperature can be adjusted through the bath taps. It is an extremely cheap choice as well as no extra plumbing is entailed. Nevertheless, the bath/shower mixers additionally struggle with troublesome temperature control choices.

  • Guidebook Mixer: The tube and spray of a manual mixer shower device are a part of the wall surface system as well as the cold and hot water supplies are connected to a solitary valve The temperature and also pressure of the water are controlled via either one or a range of handles (in a lot more costly showers). Although temperature level control is a lot easier in hands-on mixer types, they are more expensive than the formerly mentioned mixers. They additionally call for added plumbing of cold and hot water pipelines.

  • Thermostatic Mixer: The hose pipe and spray of this shower type belong of the wall surface device as well as the hot and cold water materials are connected to a solitary shutoff here too. It is total with a built-in stabiliser to self-adjust the water temperature level as well as to prevent it from ending up being too hot. Among the greatest advantages of a thermostatic mixer shower type includes convenient temperature level control. Nevertheless, it is the most costly of the various mixer options.

  • Power Shower: A power shower is a solitary unit including a powerful electrical pump that can altering both the water stress and temperature. This kind of shower can be fitted if there is water from a cold water tank and a hot water cylinder. A power shower makes the adjustment of both stress as well as temperature easy. On the other hand, it is unsuitable for water warmed straight by the shower or where the water is supplied by a mix boiler under keys stress.

  • Electric Shower: An electrical shower is plumbed into a mains cold water supply and also it heats the water electrically. It is essential to keep in mind that for this shower kind to be installed, the keys pressure requires to be at least 0.7 kg/sq cm (10lb/sq in). The unit allows the temperature level and also stress to be adjusted using a knob. Models with temperature stabilisers are much better as they stay unaffected by other faucets elsewhere being used within the home. A major disadvantage of electrical showers is that the control handle just allows for the choice of heats at less pressure, or reduced temperature levels at a greater pressure. This is troublesome in the winter when the spray is frequently weak and the mains water is chillier. Nevertheless, this issue is dealt with in some models which are offered with a winter/summer setting.

  •  

Method


Depending on the sort of shower you want to install, the shower head need to either be fitted in order to prevent its contact with the water in the bath below or the base tray, or it has to have a check valve.
Prior to beginning, it is suggested to mark the positions of the shower head and also control, as well as to prepare the pipe-work involved. In addition, the water drainage system to remove the waste water will certainly require to be prepared. Both positions of the wire path and also the shower switch will certainly likewise need to be thought about if an instantaneous or electric shower unit is being mounted.
Use the instruction guide given with the shower system to fit the shower control.Before fitting the pipelines that will supply the water to the shower system, it is essential to remove the water system. In order to protect the pipelines, they ought to be provided a water-proof covering as well as additionally fitted with separating shutoffs. The pipelines can then be buried right into the wall as well as plastered over to neaten the overall look.
Fit the base tray, shower head, and fittings.
Attach the primary shower control to the pipes that will be supplying the water (This might need a female screw thread adapter).
Reconnect the water as well as test the pipelines for any kind of leaks, as some may require tightening up.
If you are mounting an electrical shower, remember to switch off the electricity supply prior to making any type of electric connections. When these connections have actually been made (there should be guidance within the user's manual), the power supply can be changed back on.

 

Adjusting Water Stress to Suit Your Shower


The cold water tank can be raised to a better elevation (in some cases as low as 150mm (6inches)) by fitting a strong wooden support under it - possibly made up of struts and blockboards. If you choose this alternative, the major and also circulation pipes will certainly additionally have to be elevated to fulfill the brand-new height of the tank.
Alternatively, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is picked, it has to be connected right into the power supply in order to run.

 

Piping as well as Drain


It is best to use 15mm size supply pipelines, and also make the runs to the shower as brief and straight as feasible so regarding preserve optimal pressure and minimise warmth loss. Additionally, by minimising the use of elbows for pipe corners, you can decrease the resistance in the circulation of the water system. You can achieve this by flexing the pipes instead.

 

Many Common Errors

 

  • Violating or neglecting regional code constraints.

  • Making use of pipelines that are also tiny.

  • Attaching copper to galvanized without using a brass or dielectric fitting between both.

  • Not utilizing tape or pipeline substance at threaded joints.

  • Not leveling your components when mounting them.

  • Not installing an air gap filling for fixtures.

  • Reducing supply stub outs as well short to set up the shutoff valves onto after the finished wall surface remains in area.

  • Not properly aligning tubes right into fittings or stop shutoffs. (Requiring the nut onto the compression ring at an angle when the tubing goes to an angle will certainly trigger a leak.).

  • When transforming the water back on in your home, constantly run the outdoors hose shutoff or flush your bathrooms to bleed dust and air from the lines. This particles can cause troubles in your sink faucets and also other plumbing trim.


  •  

 

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

 

Frameless Shower Enclosures

 

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

 

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

 

In-line Shower Options

 

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

 

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

 

Semi-Frameless Shower Enclosures

 

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

 

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

 

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

 

Glass Block Shower Enclosure

 

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

 

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

 

Final Thoughts

 

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/


How to Build a Shower Enclosure for Your DIY Bathroom

 

Do you appreciate reading up on How to Install a Direct-to-Stud Shower Enclosure? Try to leave a short review further down. We will be glad to see your responses about this blog entry. We hope that you come back again before long. Enjoyed our content? Please share it. Let other people discover it. We thank you for reading our article about How to Install a Freestand.


Book

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments on “Step-by-step Guide to Installing a New Shower Unit”

Leave a Reply

Gravatar